Drive-To-Drive Copy Utility - Western Digital WD SATA Hard Drives Installation Manual

Drive-to-Drive Copy Utility

The Drive-to-Drive Copy utility enables you to copy files from one drive to another. This
feature is useful if you wish to replace your existing bootable hard drive with a newer, faster
hard drive.
1. Insert the Data Lifeguard Tools CD into your CD-ROM drive. Select Drive-to-Drive
Copy from the main menu.
2. Select the Source and Destination paths with the selected folders. You can click on
Browse to easily access the folder or files on both hard drives.
Note: Existing files on the destination hard drive will be overwritten if there are files on
the source drive with the same name.
3. When you have selected the folder for each path, click Start to begin drive copy. The
progress bar for the current file being copied and the overall progress is displayed.
4. When copy operation is complete, click OK to display the results summary. Click Done
to exit Data Lifeguard Tools.
5. Remove the CD and restart the computer to use your new Western Digital hard drive.
WESTERN DIGITAL SERIAL ATA HARD DRIVE
INSTALLATION GUIDE
DATA LIFEGUARD TOOLS V11.0 - 15