Install An Additional Storage Drive - Western Digital WD SATA Hard Drives Installation Manual

Install an Additional Storage Drive

1. Insert the Data Lifeguard Tools CD into your CD-ROM drive.
a) If using the DOS version, restart the computer and boot from the CD.
b) If using the Windows version, the CD autoruns on your desktop.
2. Select Run Data Lifeguard Installation Software from the setup menu.
3. The main menu appears after Data Lifeguard has loaded. Click on Set Up Your Hard
Drive from the list of available options. Data Lifeguard will take several moments to scan
for all of your system devices.
4. After detecting your installed hard drives, select the drive that you want to format or
partition as additional storage and click Next. If you are using a Serial ATA host adapter
card, click on the Additional Controllers tab to select your new drive.
WESTERN DIGITAL SERIAL ATA HARD DRIVE
INSTALLATION GUIDE
DATA LIFEGUARD TOOLS V11.0 - 12