Trane LonWorks



TR1 Series VFD Installation And Operation Manual page 17

10. Secure
• Secure LonWorks card with 3
LonWorks
Card
11. Install
• Be sure not to twist or crimp ribbon
Ribbon
• Insert cables into corresponding sockets
Cable on
TR1 Control
Board
12. Install
NEMA 1
LCP Cradle
• Insert cradle clips into holes in cassette.
• Push down on cradle to snap it into
self-tapping screws and washers
provided using Torx T-10 screw driver.
Tighten to 8 in-lbs.
cables.
and fasten in accordance with directions
in step 5.
place.
17