Remote Control; Battery Installation - Dimplex DF3015 Owner's Manual

Operation
CAUTION: If you need to
continuously reset the heater,
unplug the unit and call
Dimplex north America Limited
at 1-888-346-7539. Please
have your model and serial
number ready when calling.

Remote Control

The remote control has a range
of approximately 50 feet (15.25
m), it does not have to be pointed
at the fireplace and can pass
through most obstacles (including
walls). It is supplied with 243
independent frequencies to
prevent interference with other
units.

Battery Installation

1. Depress tab on the battery
cover on the back of the
remote transmitter and
remove battery cover.
2. Install two (2) AAA batteries
into the remote control
(included).
3. Ensure Child Lock is in the
"unlocked" position (Figure 3).
4. replace the battery cover.
!
NOTE: When the "BAT"
symbol is present on
the remote control it is
recommended to replace
Figure 3
Batteries
Child Lock
the batteries promptly, to
maintain full functionality of the
remote/fireplace. The remote
transmitter has a battery
backup time of only several
hours.
Battery must be recycled
or disposed of properly.
Check with your Local
Authority or retailer for recycling
advice in your area.
Remote Control Initialization/
Reprogramming
1. Plug cord into a 120 Volt wall
outlet.
2. Ensure the main on/off switch
located in the switch box on
the fireplace in the lower right
hand corner is in the on
position.
3. Set the Three Position
manual Control (Figure 2B)
11