Battery Installation - Dimplex DF3215 Owner's Manual

Operation
** Flame only function on DF3215NH
Resetting The Temperature
Cutoff Switch *
should the heater overheat, an
automatic switch will turn the
heater off and it will not come
back on without being reset. The
temperature cutoff switch can
be reset by unplugging the unit,
waiting 5 minutes and plugging
the unit back in.
CAUTION: If you need
to continuously reset the
heater, unplug the unit and
call Dimplex north America
Limited at 1-888-346-7539 for
technical support.
Remote Control
The remote control has a range
of approximately 50 ft. (15.25m).
It does not have to be pointed
at the fireplace and can pass
through most obstacles (including
walls). It is supplied with 243
independent frequencies to
prevent interference with other
units.

Battery Installation

1. Depress tab on the battery
cover on the back of the
remote control and remove
battery cover (Figure 4).
2. Install two (2) AAA batteries
into the remote control
(included).
3. Ensure child lock is in the
"unlocked" position.
4. replace the battery cover.
!
NOTE: When the
symbol is present on
the remote control it is
recommended to replace the
batteries promptly, to maintain
full functionality of the remote
control and fireplace. The
remote control has a battery
backup time of only several
hours.
Batteries must be recycled
or disposed of properly.
Check with your Local
Authority or retailer for recycling
advice in your area.
Figure 4
Child Lock
Batteries
11