Recording A Wav File; Starting Recording; Stopping Recording - Fostex CR500 Owner's Manual

Cd-r/rw master recorder

Hide thumbs Also See for CR500:

Supplement owner's manual (1 page)

Table Of Contents

100

page of 100

/ 100
Contents
Table of Contents
Bookmarks

Table of Contents

CD-R/RW MASTER RECORDER CR500 (Recording)

You can record analog or digital audio in the WAV file format.

The following description assumes that a BWF formatted blank CD-R (or CD-RW) disc is loaded.

POWER

(KYBD ONLY)

Starting recording

•

Press the [REC RDY] key to enter the record ready mode.

The display changes to show the input monitor screen, on which you can see the

remaining recordable time and the number of the tracks on the disc.

You can check the input level for recording. When the analog input is selected, you can

adjust the input levels for left and right channels using the [INPUT LEVEL] controls.

See "Adjusting recording levels" described earlier in this chapter for details about how

to adjust the input levels.

•

Press the [RECORD] key to start recording.

When you start recording, the input monitor screen changes as the screen example

below. While recording is in progress, the time indication is counted up, whereas the

remaining recordable time is counted down (during recording, " " is shown beside the

time indication).

<Note>: In order not to miss the beginning of the audio input source, we recommend

starting the recorder first.

On the input monitor screen, the "TRK-01" field shows the

name of the audio file currently recorded, while the "NEXT-R"

field shows the name of the next audio file to be recorded. The

file name depends on the setting of the "Default File Name"

menu item of the "SYS SETUP" menu in the MENU mode

(see page 75).

Stopping recording

•

To stop recording, press the [STOP/HOME] key.

After finishing post-processing of recording ("Please Wait..." is shown on the display),

the disc stops at the last recording position.