Edit And Setup Controls.13 - Fostex PD-4 Owner's Manual

Portable digital audio recorder

Hide thumbs Also See for PD-4:

Table of Contents

Fostex

PD-4 DIGITAL AUDIO RECORDER

Edit and setup controls

Figure 5

Edit and setup controls

29)

DiSP/QUIT key

This key is used to switch the time display on the LCD. See page 38 for details.

If you press this key during EDIT mode, the edit will be canceled.

If you press this key during SETUP mode, the PD-4 will advance through each level

item and quit after the last item. See page 46 for details.

30)

EDIT/^ key

This key is used to edit the time display. Press once to enter EDIT mode, twice to select

the edit point (digit). The DISP/QUIT key (29) cancels this mode. You can edit the

following data: A-TIME, REPRO TC, REF TC, GEN, DATE, and GEN UBIT. The GEN

and GEN UBIT edit condition varies depending on the TC GEN MODE switch (6)

setting as shown in the following table:

FREE RUN

Edit available

EXT RUN

Edit is not available

24H RUN

You can only edit the REEL NO of the GEN UBIT.

RECRUN

You can edit during recording or when a tape without time code

data is loaded.

31)

(Up) and

(Down) keys

These keys are used to adjust the values during EDIT mode. The current value

(flashing character on the display) will be incremented or decremented. If you hold the

Controls & Connections

Table of Contents