CD-R/RW MASTER RECORDER CR500 (Playback/Locate)
Creating the play list
The description below assumes that a BWF formatted disc on which more than one WAV file
is recorded is loaded. However, it is also applicable to a CD-DA formatted disc on which more
than one audio track is recorded.
<Note>: You can also access to the screen for setting the play list using the "PRO-
GRAM SET" menu in the MENU mode. To do this, follow the procedure below.
1)
While stopped, press the [ENTER/YES] key.
The unit enters the menu mode. The display shows the MENU list screen.
2)
Use the [MENU] dial to highlight "PROGRAM SET
key.
The display shows the screen for setting the play list for program playback.
For the procedure afterwards, see the next page.
1)
Press the [SHIFT] key to turn on the Shift
mode, and press the [PLAY MODE] key.
The display shows the screen for setting the
play list.
2)
Press the [ENTER/YES] key.
The display changes to show the song list
screen.
3)
Use the [MENU] dial to select a desired song
and press the [ENTER/YES] key.
The selected song is set to program number
01. (In the screen example below, file 03 is
set.)
" and press the [ENTER/YES]
<Note>: To cancel setting, press the
[CLEAR/+10] key while the program
number of which you want to cancel
the setting is highlighted (see page
60).
4)
Use the [MENU] dial to move the cursor to
"02" and press the [ENTER/YES] key.
The display changes to show the song list
screen, as step 2) above.
5)
Use the [MENU] dial to select a desired song
and press the [ENTER/YES] key, as with step
3) above.
The selected song is set to program
number 02. Repeat steps 4) and 5) until
all desired songs are set to the play list.
58