Method 3>: Using The "File Sel" Screen - Fostex CR500 Owner's Manual

<Method 3>: Using the "FILE SEL" screen
You can bring up the "FILE SEL" screen by the following two methods.
<Note>: When you select a file from the "FILE SEL" screen, the recorder does not start
playback automatically.
• Press the [FILE SEL/
While stopped, pressing the [FILE SEL/
on which the songs on the current disc are listed. The currently selected song is
highlighted.
(The screen example below shows the "FILE SEL" screen of a BWF formatted disc.
When a CD-DA disc is set, the "FILE SEL" screen shows the track number and record-
ing time.)
While the "FILE SEL" screen is shown, use the [MENU] dial (or the [SKIP/CURSOR
] keys) to select a desired song and press the [ENTER/YES] key. The display changes
to show the Home screen of the selected song and you can now play back the song.
• Go down the menu to the "FILE SEL" menu.
(1) While stopped, press the [ENTER/YES] key.
The unit enters the menu mode. The display shows the MENU list screen.
(2) Use the [MENU] dial to highlight "FILE SEL
key.
The display shows the "FILE SEL" screen, the same one which appears by
pressing the [FILE SEL/
(3) Use the [MENU] dial (or the [SKIP/CURSOR
song and press the [ENTER/YES] key.
The display changes to show the Home screen of the selected song and you can
now play back the song.
CD-R/RW MASTER RECORDER CR500 (Recording)
] key to bring up the "FILE SEL" screen directly.
DIR SEL
DIR SEL
FILE SEL
DIR SEL
<MENU list screen>
] key as described above.
DIR SEL
51
] key brings up the "FILE SEL" screen,
" and press the [ENTER/YES]
] keys) to select a desired