Digital Input; Digital Output - Fostex CR500 Owner's Manual

CD-R/RW MASTER RECORDER CR500 (Specifications)
Inputs/Outputs
* 0dBu = 0.775Vrms, 0dBV = 1Vrms
Reference level: -12dBFS/-20dBFS (default: -12dBFS, selectable in the "Ref.Level" menu item of the SYS
SETUP menu)
ANALOG INPUT L, R (balanced)
Connector
Input impedance
Reference input level
Maximum input level
ANALOG INPUT L, R (unbalanced)
Connector
Input impedance
Reference input level
Maximum input level
ANALOG OUTPUT L, R (balanced)
Connector
Output load impedance
Reference output level
Maximum output level
ANALOG OUTPUT L, R (unbalanced)
Connector
Output load impedance
Reference output level
Maximum output level
PHONES
Connector
Output load impedance
Maximum output level

DIGITAL INPUT

Connector
Format

DIGITAL OUTPUT

Connector
Format
USB (USB keyboard Only)
Connector
GPI (Fader Start)
Connector
CR500 main specifications
: XLR-3-31 type (balanced, pin-2: hot)
: 10k or higher
: +4dBu
: +24dBu (-20dBFS)
: RCA pin jack
: 10k or higher
: -10dBV
: +10dBV (-20dBFS)
: XLR-3-32 type (balanced, pin-2: hot)
: 10k or higher
: +4dBu
: +24dBu (-20dBFS)
: RCA pin jack
: 10k or higher
: -10dBV
: +10dBV (-20dBFS)
: ø6mm Stereo Phone jack
: 8 or higher
: 100mW (32 )
: XLR-3-31 type (balanced, pin-2: hot)
: IEC 60958 (S/P DIF) or IEC 60958 (AES/EBU), auto
selection.
: XLR-3-32 type (balanced, pin-2: hot)
: IEC 60958 (S/P DIF) or IEC 60958 (AES/EBU),
The format of an output signal is selected in the "Digital
Out" menu item of the SYS SETUP menu.
: USB series "A" receptacle
The keyboard uses Default Scan Code 2.
: ø6mm Phone jack
94