Visonic POWERMAX+ Installer's Manual page 5

1
Remove
bracket
locking
screw
Mark and drill 4 holes in mounting
surface. Insert wall anchors and
fasten the bracket to the mounting
surface with 4 screws.
Note: The control panel should be placed inside the secured premises. Refer to the document DE2000W for guidlines on
"Installing Wireless Systems the right way".
DE5467IP
BRACKET REMOVAL
Pull down
the bracket
until click
is heard
BRACKET MOUNTING
MOUNTING SURFACE
Screw
holes
4
Figure 3.2 – Mounting
2
Screw
holes
NOTE
Verify that there is 3 cm
(1.25 in.) at least free
space around the bracket.
3
Remove
the
bracket
MOUNTING THE UNIT
ON THE BRACKET
5
Locate the panel on the bracket
projections, pull down and lock the
bracket with locking screw (see step 1).
5