Switching the power ON
1. Check whether all electrical connec-
tions have been correctly made.
2. Check that the high limit safety cut-
out (if required) is connected.
3. Switch ON the power; the solar con-
trol unit then implements an initiation
phase.
The solar control unit is now in auto-
matic mode.
Navigation through the menu
Controls
B
A
OK key; to confirm your menu
selection or adjustment
B
Symbols line
Terminating an adjustment
already begun (the value reverts
to its previous setting)
4. Check which type of solar circuit
KOL
°C
/
/
Commissioning
pump is connected and set parame-
ter "RPM" accordingly (see
pages 33 and 43).
A
Cursor keys
Navigation through the menu
Cursor keys
To set a value
Flashing "SET" means that val-
ues can be changed.
41