Commissioning; Commissioning The Vitotrol 100; Commissioning The Wireless Receiver - Viessmann VITOTROL 100 Installation And Service Instructions Manual

Commissioning the Vitotrol 100

Commissioning the wireless receiver

A
8 Q ë r w
A LED
Operating display
Address recognition
Service function
r Heat demand for central heat-
ing
Heat demand for DHW heating
1. Open the hinged flap.
2. Use a pointed object to press
"Reset".
3. Select language with / .
4. Confirm with OK.
5. Set current date and time with / .
6. Confirm with OK.
Several Vitotrol 100 appliances with
wireless receiver can be installed in one
building. Each pair is matched in the fac-
tory. Each Vitotrol 100 can only commu-
nicate with its allocated wireless
receiver.
B
Note
If LED
has not recognised the signal from the
Vitotrol 100. If this is the case, change
the address code (see page 13).

Commissioning

r flashes, the wireless receiver
11