Scanning temperatures and operating conditions
Subject to system configuration and set-
tings made, the following values can be
scanned with keys
/ :
Display
KOL
TSPU
S3
n1
n2
hP1
hP2
kWh
MWh
Resetting the hours run and the
energy volume
Whilst this value is displayed, press the
following keys:
1. OK "SET" flashes; value 0 is dis-
played.
2. OK to confirm.
Description
°C Collector temperature
°C DHW temperature
°C Temperature at a sensor S3 that may be
connected
% Relative speed of the solar circuit pump
Status of relay R2:
OFF: Relay off
On:
Relay on
h Hours run of the device at output relay R1
(solar circuit pump)
h Hours run of the device at output relay
R2
Amount of heat if a heat meter is ena-
bled
Note
Add the values for MWh and kWh
together.
Service scans
45