Table 2-10. Status Leds On Embedded Ethernet Ports; Table 2-12. Status Leds On The U575 Pci Adapter - NEC Express5800/320Ma Manual

Table 2-10. Status LEDs on Embedded Ethernet Ports

LED Color and State
ACT/LINK Unlit
(Left)
Green, steady
Green, flashing
10/100/1000 Unlit
(Right)
Green, steady
Amber, steady
Amber, blinking
U575 PCI adapters have two status LEDs in each connector port (see
Table 2-12 describes these LEDs.

Table 2-12. Status LEDs on the U575 PCI Adapter

Color and
LED State
ACT/LINK Green,
Steady
Green,
Blinking
Off
Amber,
Blinking
10/100/1000 Off
Green,
steady
Amber,
steady
Meaning
Link not present
Link present
Ethernet activity
10-Mbps connection
100-Mbps connection
1000-Mbps connection
Identifies the PCI adapter when you
click on Identify Adapter on the
General tab in the PROSet utility.
Meaning
The U575 PCI adapter is connected to a valid link partner.
The PCI adapter and switch are receiving power, and the
cable connection between the switch and the PCI adapter is
operational.
The U575 PCI adapter is receiving link pulses.
The U575 PCI adapter is not receiving link pulses. The PCI
adapter and switch are not receiving power, the cable
connection between the switch and PCI adapter is not
operational, or the driver is not properly configured.
Identifies the PCI adapter when you click on Identify Adapter
on the General tab in the PROSet utility.
10 Mbps
100 Mbps
1000 Mbps
Troubleshooting Ethernet PCI Adapters
Ethernet PCI Adapters
Figure 2-1).
2-37