Adding Ethernet Pci Adapters To A Team; Figure 2-18. Adding An Adapter To A Team - NEC Express5800/320Ma Manual

Adding Ethernet PCI Adapters to a Team

1. Start the PROSet utility if you have not already done so (see
page 2-7).
2. In the left pane of the Intel(R) PROSet for Wired Connections dialog box,
right-click the appropriate team. In the menu that appears, click Add Adapter to
Team, then select the adapter you want to add to the team.
Repeat this step for any adapters you want to add to the team.
Figure 2-18

Figure 2-18. Adding an Adapter to a Team

3. If necessary, you can manually designate new primary and secondary adapters for
the team. See step
(If you have not previously selected primary or secondary adapters for the team,
PROSet will automatically designate adapters to fill these roles.)
4. Click Apply to process and save the changes.
N O T E
Add Ethernet PCI adapters to only one team at a time.
Complete the procedure before adding an adapter to
another team.
shows an example of adding a U574 PCI adapter to a team.
7 of "Creating Ethernet Teams" on page
Configuring Ethernet PCI Adapters
"Starting PROSet" on
2-18.
Ethernet PCI Adapters 2-31