NEC Express5800/320Ma Manual page 5

Figure 1-1.
Figure 2-1.
Figure 2-2.
Figure 2-3.
Figure 2-4.
Figure 2-5.
Figure 2-6.
Figure 2-7.
Figure 2-8.
Figure 2-9.
Figure 2-10. Adding a VLAN to a Team
Figure 2-11. Specifying a VLAN ID and Name
Figure 2-12. Network Connections Window
Figure 2-13. Ethernet Team Properties
Figure 2-14. Internet Protocol (TCP/IP) Properties
Figure 2-15. Removing an Ethernet PCI Adapter from a Team
Figure 2-16. Confirmation Message: Removing an Ethernet
Figure 2-17. Icon for a Missing (Removed) Adapter
Figure 2-18. Adding an Adapter to a Team
Figure 2-19. Obtaining the Ethernet Address for a Team
Figure 2-20. Obtaining the Permanent Ethernet Address of an
Figure 2-21. Removing a Team of Ethernet PCI Adapters
Figure 2-22. Confirmation Message: Removing a Team
Figure 2-23. Status LEDs on Embedded Ethernet Ports
Figure 2-24. Network Statistics in PROSet
Figure 2-25. Network Statistics in ftSMC
Figure 2-26. PROSet Diagnostics
Figure 3-1.
Figure 3-2.
Figure A-1.
v Express5800/320Ma: PCI Adapter Guide
PCI Adapter Slot Numbering
Faceplate of the U575 PCI Adapter
RJ-45 Connector
Initial PROSet Dialog Box
Identify Adapter Dialog Box
Setting the Link Speed and Duplex Mode
Verifying Link Speed, Duplex Mode, and Link Activity
Selecting the Type of Team
Selecting Ethernet PCI Adapters for a Team
Assigning Priorities to Ethernet PCI Adapters
PCI Adapter from a Team
Ethernet PCI Adapter
Faceplate of an Optical Fibre Channel PCI Adapter
LC Connector of a Fibre Channel Optical Cable
Removing and Installing Low- and High-Profile Faceplates A-1
Figures
1-4
2-2
2-6
2-8
2-16
2-17
2-18
2-19
2-20
2-21
2-22
2-23
2-25
2-26
2-27
2-29
2-29
2-30
2-31
2-33
2-33
2-35
2-35
2-36
2-39
2-40
2-42
3-3
3-6