Figure 2-15. Removing An Ethernet Pci Adapter From A Team; Figure 2-16. Confirmation Message: Removing An Ethernet Pci Adapter From A Team - NEC Express5800/320Ma Manual

Figure 2-15. Removing an Ethernet PCI Adapter from a Team

4. A confirmation message appears. If there are only two Ethernet PCI adapters in
the team, PROSet warns you about leaving the team with only one adapter
(Figure 2-16). Click OK.
Repeat steps 3-4

Figure 2-16. Confirmation Message: Removing an Ethernet PCI Adapter from a Team

5. When the Intel(R) PROSet for Wired Connections dialog box reappears, if
necessary, you can manually designate new primary and secondary adapters for
the team. See step
(If you are removing the primary or secondary adapter in the team, PROSet will
automatically designate other team members to fill these roles, but you can
optionally assign them yourself.)
for each adapter you intend to remove from the team.
7 of "Creating Ethernet Teams" on page
Configuring Ethernet PCI Adapters
2-18.
Ethernet PCI Adapters 2-29