Configuring Ethernet PCI Adapters
Configuring Virtual LANs Over a Team
!
1. Start the PROSet utility if you have not already done so (see
page
2-7).
2. In the left pane of the Intel(R) PROSet for Wired Connections dialog box,
right-click the appropriate team. In the menu that appears, click Add VLAN (see
Figure
2-11).
Figure 2-10. Adding a VLAN to a Team
3. In the Add New VLAN dialog box
must match the VLAN ID configured on the switch.
2-22
Express5800/320Ma: PCI Adapter Guide
C A U T I O N
Configuring a VLAN over an Ethernet team disrupts the
network traffic over the team.
N O T E
Configuring VLANs is optional. You can have an Ethernet
team without VLANs.
(Figure
2-11), enter the VLAN ID. The VLAN ID
"Starting PROSet" on