Updating A Team's Ethernet Address - NEC Express5800/320Ma Manual

Configuring Ethernet PCI Adapters
5. If necessary, reset the Ethernet address of the team. See
Ethernet Address" on page
6. If you have not already done so, connect the new Ethernet PCI adapters to the
network.
7. Verify the configuration of the team. See
VLANs" on page

Updating a Team's Ethernet Address

When you replace a primary PCI adapter, you must assign the correct Ethernet
address to the team before you connect the new primary adapter to the network.
Typically, the Ethernet address of a team is the permanent MAC address of the primary
adapter. When you replace a primary adapter, the team by default continues to use the
MAC address of the adapter you removed. Therefore, after you replace an adapter, you
must assign the team an Ethernet address that matches the permanent MAC address
of one of the Ethernet PCI adapters currently in the system.
!
If necessary, verify that the team's current Ethernet address is identical to the
permanent Ethernet address of one of the team members.
To verify the Ethernet address for a team
1. Start the PROSet utility if you have not already done so (see
page 2-7).
2. To obtain the current Ethernet address of a team, click the appropriate team in the
left pane of the Intel(R) PROSet for Wired Connections dialog box, then click the
Team Configuration tab. Note the value of Ethernet Address under Team
Information
2-32 Express5800/320Ma: PCI Adapter Guide
2-23.
C A U T I O N
The network connection is disrupted when you update a
team's Ethernet address.
(Figure 2-19).
2-32.
"Verifying the Configuration of Teams and
"Updating a Team's
"Starting PROSet" on