Figure 2-8. Selecting Ethernet Pci Adapters For A Team - NEC Express5800/320Ma Manual

Configuring Ethernet PCI Adapters

Figure 2-8. Selecting Ethernet PCI Adapters for a Team

5. After you have selected the Ethernet PCI adapters for the team, click Next, and
then click Finish.
6. When the Intel(R) PROSet for Wired Connections dialog box reappears, click
Apply. (Do not designate primary or secondary adapters at this time.) PROSet
begins to bind the specified PCI adapters into teams. This operation takes at least
one minute per team to complete. Do not abort the operation until it has
completed; otherwise, you must repeat the procedure.
7. After creating the teams, if necessary, you can manually designate a primary and
secondary adapter for each team.
a. In the left pane of the Intel(R) PROSet for Wired Connections dialog box,
expand the team and Member Adapters.
b. Right-click the Ethernet PCI adapter you want as the primary adapter, and
select Preferred Primary from the menu.
specifying the primary adapter in a team of U575 PCI adapters.
c. Right-click the Ethernet PCI adapter you want as the secondary adapter, and
select Preferred Secondary from the menu.
2-20 Express5800/320Ma: PCI Adapter Guide
Figure 2-9 shows an example of