Table of Contents
Advertisement
Figure 8: Moving the rail retaining bracket on the right rail - rear view
5. Fasten the mounting adapter brackets to the sides of the switch.
Figure 9: Attaching the mounting adapter brackets to the switch
HP StorageWorks 2/8q Fibre Channel Switch Installation Guide
d. Remove the locking nut on the rail retaining bracket and move the bracket to the
farthest position inside the rail.
e. Repeat
step a
through
a. Place the switch on a stable work surface, and then position the switch and the
brackets so that the port-side of the switch faces the flanges of the brackets.
b. Determine which mounting set-back on the brackets to use. The brackets can be
mounted so that the switch is flush with the rear of the rack, or set back approximately
three inches.
c. Use four of the provided screws to attach the brackets to the switch.
(Figure
8)
2
1
step d
for the other rail.
Installing
(Figure 9)
31
Advertisement
Table of Contents
