Table of Contents
Advertisement
2. Enter your account name on the remote host and the IP address of the remote host. When
3. The switch attempts a non-disruptive activation if possible; otherwise a disruptive
4. Enter the password for your account name.
HP StorageWorks 2/8q Fibre Channel Switch Installation Guide
prompted for the source file name, enter the path for the firmware image file. When
prompted to install the new firmware, enter Yes to continue or No to cancel. This is the
last opportunity to cancel.
User Account : johndoe
IP Address : 10.20.20.200
Source Filename : 4.0.3.xx_mpc
About to install image. Do you want to continue? [y/n] y
Connected to 10.20.20.200 (10.20.20.200).
220 localhost.localdomain server (Version wu-2.6.1-18) ready.
activation is performed. When prompted to install the new firmware, enter Yes to
continue or No to cancel. This is the last opportunity to cancel.
About to install image. Do you want to continue? [y/n] y
Connected to 10.20.20.200 (10.20.20.200).
220 localhost.localdomain server (Version wu-2.6.1-18) ready.
331 Password required for johndoe.
Password:******
230 User johndoe logged in.
The firmware is downloaded from the remote host to the switch, is installed, and is
activated.
Installing
39
Advertisement
Table of Contents
