Remote Connection - Toshiba Strata CIX40 R5.2 Software - R1 ~ R3 Hardware Installation And Maintenance Manual

Remote Connection

Remote communication to the GVPH1 requires the installation of a modem on the UADM PC (if a
modem does not already exist). The GVPH1 comes equipped with an internal modem (AMDS
daughter board) of 33.6 Kbps baud and does not require any additional equipment.
UADM PC Modem
Prepare the UADM PC by installing, connecting and configuring a modem. The modem
must be capable of communicating at a minimum of 9600 baud.
CAUTION! Internal modems configured for COM ports 3 or 4 are not supported by
UADM software.
The UADM PC's modem connects to the GVPH1 through User ID 993.
Step 3: GIPU8, GIPH, MIPU or GCOCIH
Installation
The CIX40 system can support one GIPU8, or one GIPH, or one MIPU, or one GCOCIH interface.
Figure 1-18 Card Stopper and Retainer
Strata CIX40 R3 Installation & Maintenance
GIPH/MIPU or GCOCIH
and GCTU PCB Stopper
Loosen two screws, remove
stopper before inserting card.
Replace Stopper, tighten screws.
05/10
CIX40 Installation
Detailed PCB Installation
GVPH Stopper
1-33