Toshiba Strata CIX40 R5.2 Software - R1 ~ R3 Hardware Installation And Maintenance Manual page 67

• The default programming data shown in
GSTU1/GVPH1) are not mounted. This enables voice mail to be used as is if the GVPH1 is
inserted.
• When GCDU2 is unmounted, CO4-6 or CO4 to CO7 and DKTs 9-16 are "make-busy" and
cannot be used.
• When the GCOCIH is not installed CO4 to CO7 or CO4 to CO8 are "make busy."
• When GSTU1 is not installed, SLT2 is not "make busy."
When GVPH1 is not installed, VM ports 1-4 are "make busy."
•
Table 2-4 Program 204 Default Data
In Program 204, all telephones are programmed as 20 buttons.
Table 2-5 Program 102 Default Data
Feature Code
870
Table 2-6 Program 205/213/215 Default Data
Table 2-7 Program 313 Default Data
Caller ID Prog 313
FB1
FB2
Underlined values are CIX100 default.
Note: Class Equipment number is not required for CIX40 because CLID circuits are built-in and
dedicated to each CO line.
Strata CIX40 R3 Installation & Maintenance
Table 2-3
Default Value
#963
Feature Code
870 Call Monitor Feature Button
Function
Caller ID Receive
Method
Caller ID Identification
Notice Contents
05/10
applies even if the option units (GCDU2/
Function
Call Monitor Log Off
Function
nothing/ANI-MCI/ANI-
Sprint/CLASS
ANI and DNIS/DNIS/DID
CIX40 Default Database
CIX40 Default Initialized Data
CIX40 default
CLASS
ANI or DNIS
2-3