Loop Limits - Toshiba Strata CIX40 R5.2 Software - R1 ~ R3 Hardware Installation And Maintenance Manual

CIX40 Installation

Loop Limits

Loop Limits
This section provides the maximum loop lengths for connection of telephones, lines, peripheral
equipment, and power supplies. The following information applies to only the Strata CIX40 system
refer toTable 1-20
Table 1-20 Standard (Analog) Station Loop Lengths
Standard telephones, voice mail, standard single
line telephone device, etc.
1. When the system is powered by backup battery, range may be less as the backup battery is
discharged.
2. See manufacturer's product specifications for exact resistance of device.
Table 1-21 Digital Telephone/DIU/DDSS Console/ADM/Loop Limits
DP5000-series, DKT3000, DKT3200-series
or DKT2000-series models, DKT with
2
BVSU
DKT with BPCI
DKT with BPCI and BHEU
DDSS3060 or 2060
DDCB3A
BATI, RATI
DKT with 1 ADM
DKT with 2 ADMs
1. Battery backup applies to instances when the system is being powered by batteries
exclusively.
2. CIX40 does not support Speaker OCA on digital telephones. Speaker OCA is supported
on IPT2000-series and IP5000-series IP telephones.
1-48
for standard analog connections and
Mode
Device
or DVSU or BHEU or HHEU.
Table 1-21 for digital station circuits.
1
Maximum line length (24 AWG)
Approximately 3000 ft. (909 m) with 150 ohm
2
device.
CIX40 Cabinet
length (24 AWG)
or
1
Battery Backup
CIX40 Cabinet 1000
Battery Backup 695
CIX40 Cabinet 1000
Battery Backup 500
CIX40 Cabinet 1000
Battery Backup 500
CIX40 Cabinet 1000
Battery Backup 675
CIX40 Cabinet 165
Battery Backup 500
CIX40 Cabinet 1000
Battery Backup 1000
CIX40 Cabinet 675
Battery Backup 165
CIX40 Cabinet 500
Battery Backup
Strata CIX40 R3 Installation & Maintenance
Maximum line
1 Pair
feet meters
303
204
303
151
303
151
303
204
50
151
303
303
204
50
151
33 10
05/10