R3 Mas Installation Instructions; Pci Board Installation Instructions - Toshiba Strata CIX Installation And Maintenance Manual

R3 MAS Installation Instructions

The R3 platform uses the same programming instructions as the previous 2U MAS system. It also
shares the same side rail mounting instructions to install the system in a 19-inch rack. Refer to
MAS Cabinet Mount" on page
There are some minor differences with the front panel connections as well as the instructions for
installing optional PCI cards in the system.

PCI Board Installation Instructions

To install PCI boards into the 2 MAS system please follow these instructions;
1. Remove the top cover of the 2U MAS. Retaining screws can be found on the top front of the
cover and on the side of the chassis.
2. Locate and remove the seven retaining screws, as indicated below.
Blank panel screws (4)
Card cage
screws (7)
3. Carefully remove the card cage from the system.
4. Remove the blank panels for the card slot(s) that will be populated with PCI boards.
5. Install the PCI boards as required. Make sure that they are properly seated in their respective
board connectors.
Strata CIX MAS Installation 06/09
1-4.
Media Application Server Installation
R3 MAS Installation Instructions
"2U
1-9