Assemble The Mas; 2U Mas Cabinet Mount - Toshiba Strata CIX Installation And Maintenance Manual

Media Application Server Installation
2U MAS Physical Installation

Assemble the MAS

Fax Modem Board Installation
The 2U MAS supports up to two fax modem boards per system for a maximum of 16 fax modem
ports. If you are installing a fax modem board refer to

2U MAS Cabinet Mount

The 2U MAS can be fixed in a two pole rack or mounted on sliders in a four pole cabinet.
Two Post Rackmount
The MAS is attached to a two post rack using four screws through the brackets on the front of the
cabinet.
Four Post Rackmount
1. Secure the inner rails to the MAS chassis as shown in
Figure 1 - 5 MAS with Rail Attached
2. Attach the outer rails to the front posts of the rack. Refer to
• If the post has non-threaded holes use the M5 screws and M5 nut plates. The nut plate
must go behind the post. The rail flange goes between the nut plate and the post.
• If the post has threaded M5 holes use the M4 screws and M4 nut plates. The screws will not
engage the threads in the post. The nut plate must go behind the post. The rail flange goes
between the nut plate and the post.
Figure 1 - 6 Outer Rail Attachments
1-4
Use the M4x4 (small) screws provided
to attach the inner rail to the MAS chassis
Front Post
"Fax Modem Board Installation" on page
Figure 1 - 5.
Notch in the rail
engages chassis tab.
Figure 1 - 6 and
Nut Plate
Rack Post
STRATA CIX MAS INSTALLATION 06/09
6.
0006-MAS
Figure 1 - 7.
Outer Rail