Table of Contents
Advertisement
> LEVEL
Determines the sustain level of the envelope follower. This has a significant influence on the
intensity of the effect, and it is recommended that you start with a value of 127 and reduce as
necessary.
> ATTACK
Determines the envelope follower's response time to the incoming signal peaks. It is recom-
mended that you start with a value of 0 and only increase Attack if you require a softer
response.
> RELEASE
Determines the rate at which the envelope follower responds to a reduction in the input signal
strength. Lower values result in a more dynamic, grittier sound, whereas higher values result
in a smoother sound which still contains a rhythmic element.
Global
The following parameters are global i.e. they affect each part/channel of the current
instance in the same way.
> TUNE
Determines the tuning of all parts within the current instance. Default is 0 (A=440Hz).
> TEMPO
Determines the tempo of the Virus PowerCore's internal clock, which is used to control
the rate of all the clock-syncable parameters, such as the arpeggiator, delay and lfo's. If MIDI
Clock data is being received from the host software, this controller will be greyed out and
unavailable for adjustment.
> SYNC
Use this button to determine whether the Virus PowerCore synchronises it's tempo to the
clock signal generated by the host software, or whether it uses it's own internal clock.
VIRUS POWERCORE MANUAL
THE FX2/GLOBAL PAGE
85
Hide quick links:
Advertisement
Table of Contents
