Parameters Of The Easy Page - Access VIRUS|POWERCORE User's Reference Manual

Parameters of the Easy Page

> CUTOFF
This adjusts the cutoff frequency of both filters. The result will vary depending on the currently
selected filter modes.
> RESONANCE
This adjusts the amount of resonance (Q) for both filters. This determines how much those
frequencies near the cutoff frequencies will be emphasised, so the result will depend largely
cutoff frequency of both filters. Those who want to make their PowerCore squeal like a pig
need look no further.
> CHORUS MIX
Adjusts the balance between the dry signal and the chorus effect.
> PHASER MIX
Adjusts the balance between the dry signal and the phaser effect.
> SEND
Adjusts the balance between the dry signal and the delay/reverb effect.
> OSC VOLUME
Adjusts the volume of the combined outputs of the 3 oscillators and the sub-oscillator. Turn-
ing the knob past 12 o'clock position will increase the level of filter 1 saturation (if selected).
This controller has no effect on the volume of the noise generator or the ring modulator, both
of which have independent volume controls (Osc Page).
> SUB VOLUME
An independent volume control for the sub-oscillator. This is a very simple oscillator, which
always tracks the pitch of oscillator 1, but 1 octave lower. Use this to add more bass to a
sound.
> RING MODULATOR
Adjusts the volume of the ring modulator (see Osc Page).
34