Table of Contents
Advertisement
> GLOBAL EFFECTS
Most of the effects in the Virus PowerCore are specific to each part, but the delay/reverb
effect is global i.e. all parts using the same DSP use the one delay/reverb effect. Please refer
to the Delay/Reverb section of the FX1 Page section of the manual for more specific instruc-
tions. If you wish to use more than one delay/reverb effect simultaneously, you must instance
the Virus PowerCore on another audio instrument (Extended License only).
Adjusting Parameters
The majority of Virus PowerCore controls can be adjusted by either dragging a knob, clicking
on a button or typing in a specific value.
The majority of parameters have a value range of 0 - 127. The value increases as you rotate
the knob clockwise.
There are some knobs that are bipolar. In this case the value range is -64 to 0 to +63. Centre
position (12 o'clock) is zero. Rotate the knob in an anti-clockwise direction to specify values
down to -64. Rotate clockwise to specify values up to +63.
> ADJUSTING KNOBS
Drag the knob either vertically or horizontally. (Some host software may also allow you to use
the mouse-wheel to adjust knobs.)
> TYPING IN VALUES
The majority of parameters also have a text box, which displays the current value. This can be
edited via the computer keyboard:
> TYPING A VALUE INTO A TEXT BOX
Click on the text box and then type in the desired value. If the parameter is bipolar and you
wish to specify a negative value, you must type a minus sign in front of the numbers.
To input the value without leaving the selected text box, press Enter on your numeric keypad.
To input the value and exit keyboard editing mode, press Return (Mac) or Return on the Alpha
keypad (Windows PC).
22
Hide quick links:
Advertisement
Table of Contents
