Delay/Reverb - Access VIRUS|POWERCORE User's Reference Manual

Delay/Reverb

Use the controls in this section to determine the characteristics
of the delay/reverb effect. Delay is used to create complex echo
effects and reverb is used to simulate the effect of being in an
acoustic space, such as a room or hall.
> USE GLOBAL FX FROM
The Virus PowerCore has just one global delay or reverb per
DSP, therefore only one part can control the parameters of the
Delay/Reverb at any given time.
Click on this box to select which Part shall control
the Delay/Reverb effect.
All currently active Parts sharing the same DSP will
use the delay/reverb settings from the Part
selected here. The delay/reverb controls will be
greyed out in the other three Parts.
NOTE: Remember that although there is only one
Global Delay/Reverb per DSP, each Part still has it's
own individual Send parameter.
> MODE
Select the type of effect to be used. Options
include Delay, Reverb, Reverb+Feedback and several 'Groove' delays which can be used for
complex rhythmic effects
> Off:
When switched to Off, the Delay/Reverb effect is deactivated.
> Delay:
Use this for a simple echo effect where each repeat is evenly spaced.
> Reverb:
Use this to create the effect of an acoustic space, such as a room or a hall.
74