Access VIRUS|POWERCORE User's Reference Manual page 113

BPC: BANK/PROGRAM-CHANGE PARAMETER BANK SELECT
selects the Single bank accessed by a subsequent Program Change, similar to the regular Bank
Select.Bank Change directly changes the Single program to the requested bank, without changing the
program number. Program Change directly changes the Single program to the requested program
number, without changing the bank number; similar to the regular Program Change. Part number $40
will address the Single buffer in Single Mode.
On non-part-sensitive parameters the part number is ignored, but must still be sent as any value.
Remarks for editor/librarian programs Not all 256 bytes of a Single or Multi Dump are defined as a
parameter. Some of them are defined for internal use or reserved for future applications. In a bulk
dump these byte should not be changed, they should be sent to the Virus on the same value as they
were received in the dump.
VIRUS POWERCORE MANUAL 113
APPENDIX