Table of Contents
Advertisement
> OSC 1
Determines the amount of modulation applied to the pitch of osc1.
> OSC 2
Determines the amount of modulation applied to the pitch of osc 2.
> LINK (OSC1 & OSC2)
When enabled, adjusts the amounts of LFO 1-> Osc 1 and LFO 1->Osc 2 simultaneously.
> PW 1+2
Determines the amount of modulation applied to the pulse widths of oscillators 1 and 2. One
or both of these oscillators must be set to a square wave for this parameter to have an effect.
> RESO 1+2
Determines the amount of modulation applied to the resonance of filters 1 and 2.
> ASSIGN AMT
Determines the amount of modulation applied to the parameter selected in the Assign Desti-
nation window.
> ASSIGN DESTINATION
Select virtually any parameter in the Virus PowerCore to be modulated by LFO 1.
> FILTER GAIN
Determines the amount of modulation applied to the input gain to the filter section. This is
often used to create tremolo effects (try a sine or triangle wave).
62
Hide quick links:
Advertisement
Table of Contents
