Table of Contents
Advertisement
The phaser will also turn a mono sound into stereo.
> MIX
Determines the balance between the dry signal and the phaser effect. At 0, the phaser is Off.
At 127, the signal is 100% wet.
> RATE
Determines how fast the phaser will sweep through the frequency spectrum.
> DEPTH
Determines the frequency range through which the phaser will sweep. The higher the value,
the greater the intensity of the phasing effect.
> FREQUENCY
Determines the center frequency about which the phaser will sweep.
> STAGES
Determines the number of filter stages used to create the phasing effect. The higher the
number, the more complex the effect becomes.
> SPREAD
Determines the bandwidth of the phaser's filters.
> FEEDBACK
Determines the amount of signal to be fed back into the phaser. Experiment with both posi-
tive and negative values for different types of extreme phasing.
VIRUS POWERCORE MANUAL
THE FX-1 PAGE
71
Hide quick links:
Advertisement
Table of Contents
