Classes - Access VIRUS|POWERCORE User's Reference Manual

Classes

P: PERFORMANCE CONTROLLER
Accessible by Control message. Performance Controllers are not stored with a Single-Sound. If more
than one Multi Part is set to the same MIDI channel, all Parts on this MIDI channel receive the same
Performance Controllers.
A: SOUND PARAMETER OF BANK A
Accessible by Control message, SysEx-Parameterchange and Single-Dump.The Sound Parameters
are stored with a Single Sound. When received as Control Message, the Sound Parameter is received
only by the Multi Part with the lowest part number, if more than one Multi Part is set to the same MIDI
channel. When received as SysEx-Parameterchange or Single-Dump, the part is addressed by the part
number irrespective of the actual MIDI channel setting.
B: SOUND PARAMETER OF BANK B
Accessible by MIDI Polyphonic Pressure, SysEx-Parameterchange and Single-Dump.The Sound
Parameters are stored with a Single Sound. When received as Polyphonic Pressure, the Sound Param-
eter is received only by the Multi Part with the lowest part number, if more than one Multi Part is set to
the same MIDI channel. When received as SysEx-Parameterchange or Single-Dump, the part is
addressed by the part number irrespective of the actual MIDI channel setting.
MS: MULTI/SINGLE PARAMETER
When in Single Mode, the parameter is received and stored with the Single Sound.When in Multi Mode,
the parameter is received and stored with the Multi Patch. In Multi Mode the Single Sound settings are
ignored while the corresponding Multi Patch settings are active.
NP: NON-PART-SENSITIVE SOUND PARAMETER
When in Multi Mode, the parameter affects all Multi Parts.
112