Rear Panel - TC Electronic Finalizer User Manual

REAR PANEL

Main Power Balanced
Power Input
Switch Inputs
NOTES:
To accommodate international regulations, we have also added a rear panel power switch.
You don't need to use the power switch on the rear panel. Use the front panel power switch instead.
Pin 2 is »hot« on all XLR's (IEC and AES standards).
If you are connecting the Finalizer to unbalanced equipment, you must tie pins 1 and 3 together in the cable
ends away from the Finalizer.
We have reserved the two unused pins on the MIDI connectors for an optional RS485 interface.
Therefore, if you are connecting the Finalizer to other equipment that use these pins, please make sure the
cable is a 3-wire standard MIDI type (not a five wire MIDIPLUS type).
If you want to use the pedal input, make sure it is a momentary »make« type.
8
Serial No.
Balanced
XLR XLR
Outputs
AES/EBU S/PDIF MIDI
Digital Digital In,Thru,Out
in/out in/out
Pedal/Fader
Input