TC Electronic Finalizer User Manual page 4

PRECAUTIONS
WARNING - THIS APPARATUS MUST BE EARTH-
ED
Use only a three wire grounding type line cord,
like the one supplied with the Finalizer.
Be advised that different operating voltages require the use of a
different type line cord and attachment plug.
In doubt contact your TC distributor.
Check the voltage in your area and use the correct type.
Voltage Line plug according to standard
110-125V UL817 and CSA C 22.2 no. 42
220-230V CEE 7 page VII,
SR section 107-2-D1/IEC 83 page C4
240V BS 1363 of 1984. Specification for 13A.
fused plugs and switched and
un-switched socket outlets
See table below:
CAUTION - Do not open the Finalizer.
Risk of electric shock inside. There are no user-serviceable
parts inside. Refer servicing to qualified service personnel only.
Mount the Finalizer with a little space above and below in a
well ventilated rack. Don't block the top or bottom.
To prevent electrical shock or fire hazard, do no expose the
Finalizer to rain or moisture.
Do not rely solely on the front screws when mounted in touring
rack. Support the back of the Finalizer as well.
Please report any shipment damage or equipment malfunctions
to your dealer, TC distributor or the TC head office in
Denmark.
4