Recall - TC Electronic Finalizer User Manual

RECALL

Select which blocks will be loaded
from new preset.
Preset name
Recall
When you wish to recall a preset, simply use the ADJUST wheel
to scroll through the presets and press OK to recall.
The OK key will be blinking while you are previewing, indicat-
ing that the shown preset is not recalled yet.
It is also possible to recall separate sections of a pre-
set. Select the desired section, using the PARAMETER
keys, and press OK.
The Recall Display
In the Recall display, you will see an information section at the
bottom of the screen. In this section you are able to see which
blocks are turned on in the current preset, and also a small EQ
preview with a miniature icon of the EQ setting.
In the upper right corner, you see an indication of which bank
you are previewing.
12
ROM bank
Short info about preset
Factory/User Presets
Factory Your own
Presets Presets
ROM
PRESETS
Preset banks
The Finalizer contains two different preset banks.
The RAM bank can hold up to 128 presets.
The RAM preset bank is located after the ROM bank. This
means that you scroll through the ROM presets to enter the RAM
bank.
For fast RAM/ROM access use the BLOCK keys
to switch between the two banks.
Note: When previewing in the RAM bank you will not see the
empty RAM space.
RAM bank
Preset number
128 RAM
PRESETS