Returning To Zero Or The Last Recording Position; Fast Forwarding And Rewinding; Cueing With The Jog/Data Dial; Jogging While Viewing A Waveform - Tascam DP-32 Digital Portastudio Owner's Manual

7 - Recorder Functions
Returning to zero or the last
recording position
You can easily jump to the beginning of a song
(00:00:00:00 = ZERO point) or to the last recording
position (LAST REC point) by using two buttons at once.
To return to the beginning of a song (00:00:00:00 = ZERO
point), press and hold the STOP (8) button and press the
REW (m) (TO ZERO) button.
To return to the last recording position (LAST REC point),
press and hold the STOP (8) button and press the F FWD
(,) (TO LAST REC) button. This function is useful when
you want to record again after finishing recording.

Fast forwarding and rewinding

During playback or when stopped, press the REW (m)
or F FWD (,) button to rewind or fast-forward while
the button is pressed. The rewind and fast-forward speed
is fixed at 10 times normal speed.

Cueing with the JOG/DATA dial

You can use the JOG/DATA dial to jog to a precise
playback position. There are two ways to cue by jogging:
while viewing a track's waveform and while listening to
the audio of tracks.

Jogging while viewing a waveform

1. Use the transport buttons or other locate functions
to move the playback position near the position
where you want to cue playback.
2. Press the JOG PLAY button to enter jog mode.
If in timeline display mode, press the F1 key to switch
to waveform display.
3. Press the SELECT button for the track that you want
to view.
The waveform of the selected track appears.
If a stereo track is selected, the displayed track (odd
or even) changes each time the SELECT button is
pressed, and you can monitor only the displayed track.
4. Use the CURSOR (g/t) buttons to increase/
decrease the horizontal zoom (time) as necessary.
Press the CURSOR g button to decrease the
horizontal zoom (time), or the CURSOR t button to
increase it.
You can also use the CURSOR (5/b) buttons to
increase/decrease the vertical zoom (audio level).
Press the CURSOR 5 button to increase the vertical
zoom (audio level), or the CURSOR b button to
decrease it.
Increasing the zoom makes it easier to cue precisely.
52
TASCAM DP-32
5. Use the JOG/DATA dial to locate the cue point.
6. After you find the cue point, press the JOG PLAY
button to return to the Home screen.

Jogging while listening to audio

1. Use the transport buttons or other locate functions
to move the playback position near the position
where you want to cue playback.
2. Press the JOG PLAY button to enter jog mode.
If in waveform display mode, press the F1 key to
switch to timeline display.
3. Use the CURSOR (g/t) buttons to increase/
decrease the horizontal zoom (time) as necessary.
Press the CURSOR (g) button to decrease the
horizontal zoom (time), or the CURSOR (t) button to
increase it.
Increasing the zoom makes it easier to cue precisely.
The jogging sound, which is the sound of a short
increment being repeated, can be heard.
4. While listening to the jog sound, use the JOG/DATA
dial to locate the cue point.
5. After you find the cue point, press the JOG PLAY
button to return to the Home screen.
NOTE
The transport buttons can be used even in jog mode.
However, when the timeline is displayed, pressing the PLAY
button switches between normal playback and jog playback,
and pressing the STOP button activates jog playback.
When in jog mode, you can move in 1/10 frame (1/300
seconds) units. You can also set IN and OUT points with 1/10
frame precision.