11 - Various Other Functions; Metronome; Midi Sync - Tascam DP-32 Digital Portastudio Owner's Manual

11 - Various Other Functions

Metronome

This unit has a built-in metronome that can be used when
the recorder is running.
You can set it to work during both playback and recording
or only during recording.
1. When the recorder is stopped, press the
METRONOME button to open the
screen.
2. Set the following items.
Use the CURSOR (5/b) buttons to select the desired
item, and then use the JOG/DATA dial to set its value.
MODE
You can select from the following modes.
Mode
OFF
Default, metronome off
Active during recording and
REC&PLAY
playback
REC
Active only during recording
LEVEL
Set the metronome volume.
The setting range is from
TEMPO
Set the speed.
The setting range is from
(Default: )
120
SIGNATURE
Set the time signature to 4/4, 3/4, etc.
The setting range is from
(Default: )
4/4
BAR DISP
Set the display to
BAR
3. After making the settings, press the HOME button
to return to the Home screen.
The metronome works according to the
made in step 2 above.
When enabled, the METRONOME button flashes in
time with the metronome tempo.
The metronome signal is not recorded even if set to
work during recording.
70
TASCAM DP-32
METRONOME
Description
to . (Default: )
0 127 60
to (BPM).
20 250
to .
1/1 12/8
or . (Default: )
ON OFF OFF
setting
MODE
NOTE
• When the metronome is working, you can monitor the
sound of the metronome through connected external
speakers. Note, however, in this case that the metronome
sound could also be recorded if you are using a
microphone to record in the same room.
• When the metronome is running, you can adjust the
item on the
LEVEL METRONOME
items cannot be changed.
• You can use the metronome as a click track to help keep
time when recording rhythm guitar or bass, for example,
as the first tracks of a song.
• If you want to use the metronome alone for practice,
you can either turn each track's fader all the way down
during playback or play a song that does not have any
recordings.

MIDI Sync

This unit support MIDI Time Code (MTC) and MIDI Clock,
so synchronization with other equipment is possible.
The following synchronization types are available.
ª MTC Master
You can synchronize the MTC generated by this unit with
external equipment (MTC compatible synthesizer, DAW,
etc.).
ª MIDI Clock Master
You can synchronize external equipment (sequencer,
drum machine, etc.) with MIDI clock based on a specified
tempo.
NOTE
When MIDI clock master is active, in addition to the MIDI
clock, a variety of data, including start, stop, continue and
song position points is transmitted from this unit to another
device. When MTC master is active, full timecode messages
can be transmitted while locating the song position.
The synchronization settings are made under the
item on the screen.
MIDI
ª FRAME TYPE
The MTC frame type used for transmission/reception is
always 30 (which is common for music and high-definition
video).
ª GENERATOR
Select the sync signal output from the MIDI OUT jack.
• Select
to set this unit to MTC Master.
MTC
• Select to set this unit to MIDI Clock Master.
CLOCK
• Select when you do not want to output a sync
OFF
signal from the unit.
screen, but other
SYNC