Creating An Audio Cd With The Master File; Inserting A Cd - Tascam DP-32 Digital Portastudio Owner's Manual

2. Press the F3 (
LIBRARY
list.
3. Use the JOG/DATA dial to select (highlight blue) an
item in the list and then press the F4 (t) button to
load a suitable setting from the library.
The library list closes.
TIP
You can also adjust the parameters on the
screen using the CURSOR keys and JOG/DATA dial. (See
"Using mastering compression" on page 68.)
4. Press the F4 ( ) button to turn the compressor on.
ON
The icon changes to
OFF
5. Press the F1 (g) button to return to the Mastering
screen.
6. Press the PLAY (7) button on the Mastering screen
to listen to the master file with compression.
NOTE
If the item is set to on the
EQ ON
effect of the equalizer on the sound will also be heard.
ª Normalizing
Normalizing maximizes the volume of the master file
without changing the dynamic range.
1. When in
Mastering
button to open the
NORMALIZE
2. Press the F2 ( ) button to perform the
YES
normalization.
3. Press the F1 (g) button to return to the Mastering
screen.
) button to open the library
COMP MULTI
.
ON
screen, the
EQUALIZER
mode, press the F4 (
NORM
screen.
ª Using the noise shaper
Use this function to reduce quantization distortion.
1. When in
Mastering
button to open the
screen.
2. Press the F4 (
shaper to
ON
3. Press the F1 (g) button to return to the Mastering
screen.
ª Re-recording the master file
Re-record the master file with equalization and
compression applied to create a new master file.
1. When in
Mastering
button.
2. This will record over the master file and create a
new master file with equalization and compression
applied.
Creating an audio CD with the
master file
You can use a master file that you have created to make
an audio CD that can be played back by an ordinary CD
player, for example.

Inserting a CD

1. When in
Multi Track
to open the
CD
)
CAUTION
• When in a mode other than
you cannot open the
In or
Mixdown
MIXDOWN/MASTERING button repeatedly until you
return to
Multi Track
In mode, press the BOUNCE button to
Bounce
switch to
Multi Track
2 - Quick Guide
mode, press the F3 (
NOISE SHAPED DITHERING
) button to set the noise
ON/OFF
.
mode, press the RECORD (0)
mode, press the CD button
menu.
Multi Track
menu.
CD
mode, press the
Mastering
mode.
mode.
TASCAM DP-32
)
NSD
mode,
19