Cd Mode Messages - Tascam DP-32 Digital Portastudio Owner's Manual

Audio Rst Fail
Device Error
File Error
No CD Drive
Not Continued
Remote Cmd
Remote Rx
Sys Rom Err
System Err 50
System Error 1
System Error 2
System Error 3
System Error 4
System Error 5
System Error 6
System Error 7
System Error 8
System Error 9
Writing Failed

CD mode messages

The following pop-up messages appear when the unit is in CD mode (when the
Refer to this chart when you want to understand the meaning of these messages and how you should respond to them.
Message
Blank CD
Insert CD-RW
Blank CD
Insert Opened CD
Finalized CD
Insert CD-RW
Finalized CD
Insert Opened CD
Import File
Too Big
Invalid CD
Insert Blank CD
Not Erasable
Insert CD-RW
Invalid CD
Insert Opened CD
If any of these errors occur, turn the unit's power off and restart it.
If these error messages continue to appear, please contact a TEAC Service Center.
A blank CD has been inserted. Insert a CD-RW that is not blank.
This message appears when the ERASE item of the CD menu is used, but the set disc is blank. There is no
need to erase the inserted CD-RW.
A blank CD has been inserted. Insert an unfinalized CD-R/CD-RW.
This message appears when the FINALIZE item of the CD menu is used, but the set disc is blank.
Insert a CD-R/CD-RW that you want to finalize.
A finalized CD-RW has been inserted. Insert an unfinalized CD-RW.
This message appears when the ERASE item of the CD menu is used, but the set disc is a finalized CD-R/
CD-RW.
Only CD-RW discs can be erased.
A finalized CD-R/CD-RW has been inserted. Insert an unfinalized CD-R/CD-RW.
This message appears when the FINALIZE item of the CD menu is used, but the set disc is an already
finalized CD-R/CD-RW.
This CD-R/CD-RW does not need to be finalized.
The size of file to be imported is too large.
When using the CD PLAY/IMPORT item of the CD menu, the size of the file to be imported exceeds the
free space on the SD card.
Create more free space on the SD card by erasing the undo operation history, for example, to open
enough space to import the file.
An invalid CD-R/CD-RW has been inserted. Insert a blank CD.
You tried to write to a CD-R/CD-RW using the MASTER WRITE or CD BACKUP items in the CD menu, but
inserted a CD-R/CD-RW that is not blank. (When using Track At Once, this message also appears if a
finalized CD-R/CD-RW is set.)
Insert a blank CD.
A disc other than a CD-RW has been inserted.
This message appears when the ERASE item of the CD menu is used, but the set disc is a CD-R.
Insert a CD-RW that you want to erase.
An invalid CD-R/CD-RW has been inserted. Insert an unfinalized CD-R/CD-RW.
This message appears when the FINALIZE item of the CD menu is used, but a CD-R/CD-RW that cannot
be finalized has been inserted.
Insert a CD-R/CD-RW that you want to finalize.
menu or one of its submenus is open).
CD
Description and remedy
16 – Messages
91
TASCAM DP-32