Navigating Screens; Function Button Assignments; Navigation Examples - Tascam DP-32 Digital Portastudio Owner's Manual

3 – Names and Functions of Parts

Navigating screens

After using the MENU button or a dedicated button to
open a screen, follow the guidelines below to use the
functions on the screen.
These examples show basic operation procedures, but
the actual assignments of the function buttons (F1 to F4
buttons) depend on the screen.
• Use the JOG/DATA dial or the CURSOR (5/b/g/t)
buttons to select (highlight green) the desired item.
This example shows the
item selected.
• This example shows the

Function button assignments

The assignments of the function buttons (F1 to F4) are
shown at the bottom of the screen above the buttons
themselves.
"4" above the F2 button shows that "4" is assigned to the
F2 button when using this screen.
In this manual, the function assigned to a function button
is shown in parentheses, for example, "F2 (4) button".
In this way, " " is assigned to the F3 button, and "t"
INFO
is assigned to the F4 button.
When an item has a menu, "t" appears on the right side,
and the F4 (t) button is used to open it.
In the menu, you can press the F1 (g) button to return to
the previous screen.
30
TASCAM DP-32
screen with the
MENU SONG
menu.
SONG LIST

Navigation examples

In this menu, use the JOG/DATA dial or the CURSOR
(5 /b) buttons to select
(t) button to load the song.
• When the cursor (highlighted blue) is on a setting
value, use the JOG/DATA dial to change the value.
To select an item, use the CURSOR (5/b) buttons.
This example shows the
Use the JOG/DATA dial to change the value.
Move the cursor (highlighted blue) up or down.
• To move left or right, use the CURSOR (g/t) buttons.
• Press the HOME button to return to the Home Screen.
, and then press the F4
LOAD
screen.
PREFERENCE