Chapter 5 - Selecting Screens - Tascam SX-1 Reference Manual

Part II — Monitoring Signals and Selecting Screens
Screen Controls
You have a choice of using the onboard LCD or a
connected SVGA display as your main screen.
Main Display Key
The key selects between the SX-1's
MAIN DISPLAY
onboard LCD screen or an external SVGA monitor
as your main GUI display. The LCD display always
follows the selection keys in the MAIN DISPLAY
MODES section.
To have an external SVGA follow these keys, press
and make the associated
MAIN DISPLAY
LED light. The LED indicator set-
<EXTERNAL>
tings are as follows:
<INTERNAL> When the <INTERNAL>
minated, the GUI windows recalled by the keys in the
MAIN DISPLAY MODES
screen. If an SVGA screen is connected, its screen
will not follow the
MAIN DISPLAY MODE
Main Display Mode Section
The controls in this section recall different GUI
screens. These screens appear on both the LCD and a
connected SVGA display (when the
key is set to external).
TRACK
The key recalls the
TRACK
where tracks are created and edited.
Chapter 5 – Selecting Screens
LED is illu-
section appear on the LCD
keys.
MAIN DISPLAY
screen,
TRACK
When the
<EXTERNAL>
the GUI windows recalled by the
keys appear on both the LCD screen and the
MODES
external SVGA display at the same time.
TIP
SVGA screens can also be changed, independently of
the LCD, by pressing ALT and a number key on a con-
nected PS/2 keyboard.
This option is available regardless of the MAIN
DISPLAY key's setting.
The LCD also has its own set of dedicated UI controls in
the LCD ACCESS section.
MIXER
The key recalls the
MIXER
which shows a full console view on the SVGA, along
with a channel-at-once view on the LCD.
CHANNEL
The
CHANNEL
screen, which shows all of the parameters
CHANNEL
for a selected channel.
TASCAM SX-1 Reference Manual
LED is on,
<EXTERNAL>
MAIN DISPLAY
screen,
MIXER
key recalls the
MIXER
17