Screen Operations - Tascam Digital Portastudio DP-24 Owner's Manual

3 – Names and Functions of Parts

Screen operations

Use the MENU button and dedicated buttons to open
screens, and then follow the guidelines below to use the
functions on the screens.
These examples show basic operation procedures, but
the actual assignments of the function buttons (F1 to F4
buttons) vary depending on the screen.
Use the JOG/DATA dial or the CURSOR (5/b/g/t)
•
buttons to select (green highlight) the desired item.
This example shows the
The menu item is selected on this screen.
SONG
NOTE
About function buttons
The assignments of the function buttons (F1 to F4) are
shown at the bottom of the screen above the buttons
themselves.
"4" above the F2 button shows that "4" is assigned to the
F2 button when using this screen.
In this manual, the function assigned to a function button
is described as F2 (4) button, for example.
" is assigned to the F3 button, and "t"
In this way, "
INFO
is assigned to the F4 button.
When an item has a sub-menu, "
•
side, and the F4 (t) button is used to open it.
32
TASCAM DP-24
screen.
MENU
t" appears on its right
On the sub-menu, you can press the
•
return to the previous screen.
This example shows the
On the sub-menu, use the JOG/DATA dial or the
CURSOR (5 /b) buttons to select
press the F4 (t) button to load the song.
When the cursor (blue highlight) is on a setting value,
•
use the JOG/DATA dial to change the value.
To select an item, use the CURSOR (5/b) buttons.
This example shows the
Use the JOG/DATA dial to change the value.
Move the cursor (blue highlight) up or down.
When you have to move left or right, use the
•
(g/t) buttons.
HOME button to return to the Home Screen.
Press the
•
F1 (g) button to
screen.
LOAD
, and then
LOAD
screen.
PREFERENCE
CURSOR