Setting The Sampling Frequency; Setting The File Recording Mode; Stereo Track Recording Settings; Arming And Disarming Tracks For Recording - Tascam projector Owner's Manual

Setting the sampling frequency

You can set the sampling frequency and record BWF and
WAV files at 44.1, 48, 96 or 192 kHz.
1. Press the MENU button to open the
screen.
MENU
2. Use the DATA wheel to select the
press the ENTER/MARK button.
3. Use the DATA wheel to select one of the following
options: (default value),
44 . 1 k Hz
.
1 92k Hz
NOTE
When the file format is MP3, 96 kHz and 192 kHz
cannot be selected.
4. Press the MARK (.) button to return to item
selection on the
MENU
5. Press the HOME/DISP button to return to the Home
Screen.

Setting the file recording mode

The file recording mode can be set to a monaural file, a
stereo file or a 6-channel file.
1. Press the MENU button to open the
screen.
MENU
2. Use the DATA wheel to select the
the ENTER/MARK button.
3. Use the DATA wheel to select one of the following
options: ,
MONO STEREO
NOTE
• When set to MONO, a mono file is created for each
recorded track. When set to STEREO, a stereo file is
created for each pair of tracks (1-2, 3-4 and 5-6). When
set to 6ch, one 6-channel file is created for tracks 1-6.
• 6ch cannot be selected when the file format is set to
MP3 or the sampling frequency is set to 192 kHz.
• When dual recording is enabled, only MONO can be
selected. (See "Enabling dual recording" on page
31.)
• Press the MARK (.) button to return to item
selection on the
MENU
4. Press the HOME/DISP button to return to the Home
Screen.
page of the
REC
item, and
SAMPLE
, , or
48k Hz 96k Hz
screen.
page of the
REC
item, and press
F I LE
(default value), or .
6ch
screen.

Stereo track recording settings

You can set what is recorded on the stereo track.
1. Press the MENU button to open the
screen.
MENU
2. Use the DATA wheel to select the
press the ENTER/MARK button.
3. Use the DATA wheel to select one of the following
options.
(default): Record a mix of the 6 inputs on the
M I X
stereo track.
: Record the signal from the DIGITAL/
D I N
SYNC IN input jack on the stereo track.
4. Press the MARK (.) button to return to item
selection on the
MENU
5. Press the HOME/DISP button to return to the Home
Screen.
Arming and disarming tracks for
recording
Tracks can be armed and disarmed for recording from the
screen.
MENU
1. Press the MENU button to open the
screen.
MENU
2. Use the DATA wheel to select (highlight) the
item, and press the ENTER/MARK button.
3. Use the channel number (1–6) buttons on the front
panel to arm/disarm recording for the corresponding
tracks. When a track is armed for recording, its track
number appears light on a dark background.
4. Press the MARK (.) button to return to item
selection on the
MENU
5. Press the HOME/DISP button to return to the Home
Screen.
4 – Recording
page of the
REC
item, and
ST REC
screen.
page of the
REC
TRACK
screen.
25
TASCAM DR-680