Table of Contents
Advertisement
A C T I V E
S T U D I O
M O N I T O R S
3
Initial system set-up
The first screen to appear once program has fully launched, with all the networked monitors and
subwoofers recognised, is shown in Fig. 2. The network is displayed in the set-up section on the left
side of the screen.
Fig.2. Initial system set-up screen
Monitor task assignment
Each Precision iDP
TM
monitor must be assigned a given task so that the network recognises where each
monitor is placed in the system. From the horizontal row of buttons in the <Functions> menus select
<Setup>. On the window that appears open the drop down menu <Precision setup> and select the
type of system configuration you are installing.
The choices from this menu are:
- Custom
- Stereo Analog
- Stereo Digital
- Stereo 192kHz*
*Optional Digital Input Card required.
If required check the <BNC Sync> box for locking on the BNC input.
6
- Surround Analog
- Surround Digital*
- Surround 192kHz*
- 5.1 Dig/6-Master*
Advertisement
Table of Contents
