Table of Contents
Advertisement
A C T I V E
S T U D I O
M O N I T O R S
<Lock>
Press this button to access the <Lock> menu as shown in Fig 7. The purpose of
this menu is to prevent accidental change of important parameters, which have
been previously set up. Locked parameters cannot be accessed from the LCD
panel on the master monitor or from iDP
Fig.7. Lock function menu
The lock function can be applied to the following areas – Global Parameters, Local Monitor Parameters,
& User Presets. Simply select a parameter you wish to lock from the list and check the 'locked' box in
each case to lock the desired parameter. A specific selection or all parameters may be locked.
A locked parameter will show [Lck] next to its list entry.
The following parameters can be locked:
Global Parameters
Local Monitor Parameters
User Presets
<Clear All>
<OK>
12
Reference levels 1,2 &3
Store Presets
Recall Presets
Delay
Calibration Levels
Bass
Treble
Speaker Room Position
Phase (Subwoofer)
LFE Polarity
User Presets 1-14
Use the lock function to avoid the user presets
being accidentally overwritten.
This button will clear all locked parameters.
Confirm locked parameters and return to main screen.
software.
TM
Advertisement
Table of Contents
