Tannoy PRECISION PC/IP Manual page 14

Advanced installers software package active studio monitors
Table of Contents

Advertisement

A C T I V E
S T U D I O
M O N I T O R S
<Backup> /cont.
<Read Note>
Allows access to any user notes attached to the current preset.
<New Note>
This allows you to enter new note text for the current preset.
<View>
This lets you view all parameters and settings for the current preset.
<Recall>
Recall the backup file at the selected location.
<Software>
Press to access the <Software Loader> menu shown in Fig 9.
Loading new monitor software using the Precision iDP PC-iP
1.
Place the new software at a convenient place on your hard drive. If the software has
been downloaded in the form of a zip file, then you will have to extract the file first.
2.
Disconnect all network cables from the speaker you wish to update then connect
your computer to this speaker.
3.
In order to be able to download new software the Precision iDP
to be set to Boot mode. Checking the <Restart to Boot before Transfer> box
does this.
4.
Use the drop down menu <File locations & software type> and browse for the
file to be downloaded.
5.
Select the desired file and press the <Send file> button to upload the new software
onto the Precision iDP
6.
Continue the process of updating one speaker at a time.
7.
Replace the network cables.
8.
Re-assign the appropriate monitor tasks to each speaker in your iDP system.
14
Fig.9. Software update loading menu
It may be the case that new software and firmware
features become available in the future. A software
loader feature is available to allow you to keep
up with the latest developments and updates
without having to purchase new hardware.
Please visit www.tannoy.com for full details.
Monitors.
TM
TM
software
TM
monitors have

Advertisement

Table of Contents
loading

Table of Contents